HOMEPAGE Online BusinessGadgets And GizmosSite PromotionSelf Improvement And MotivationTravel And LeisureLegalHome ImprovementAuto And TrucksReligionRecreation And SportsParentingHumorWritingMenFood And DrinkMarketingKids And TeensPolitics And GovernmentComputers And InternetHealthWomenRelationshipsHobbiesBusiness And FinanceMusic And MoviesEducationPets And AnimalsFamilyWeb Design And Development

Oxy Acetylene Welding For Dummies

Acrticle from category Auto And Trucks


Oxy Acetylene Welding For Dummies
by: Francis Haike


Oxy Acetylene Welding and Cutting Materials
Oxy-acetylene welding is an autogenous welding process, in which two parts of the same or different metals are joined by causing the edges to melt and unite while molten without the aid of hammering or compression. When cool, the parts will form one whole piece of metal.
The oxy-acetylene flame is made by mixing oxygen and acetylene gases in a special welding torch or blowpipe, producing, when burned, a heat of 6,300 degrees, which is more than twice the melting temperature of the most common metals. This flame, while being of intense heat, is of very small size.
Oxy Acetylene Cutting
The process of cutting metals with the oxy-acetylene flame produced from oxygen and acetylene depends on the fact that a jet of oxygen directed upon hot metal causes the metal itself to burn away with great rapidity, resulting in a narrow slot through the section cut. The action is so fast that metal is not injured on either side of the cut.
Carbon Removal Process
This process depends on the fact that carbon will burn and almost completely vanish if the action is assisted with a supply of pure oxygen gas. After the combustion is started with any convenient flame, it continues as long as carbon remains in the path of the jet of oxygen.
Materials
For the performance of the above operations we require the two gases, oxygen and acetylene, to produce the flames; rods of metal which may be added to the joints while molten in order to give the weld sufficient strength and proper form, and various chemical powders, called fluxes, which assist in the flow of metal and in doing away with many of the impurities and other objectionable features. Keywords: acetylene, welding, oxygen, metal, oxy, flame, process, oxy acetylene, oxygen acetylene,

Related articles:

» Test Driving Your Car
» Motorcycle Shipping.
» A Guide to International Car Shipping
» Vehicle Transport
» Consumer Tips: How To Buy A Used Car Privately
» A Guide to Getting the Best Vehicle Shipping Quote